V&H Power Duals, FP3, V&H breather, CFRs

[rabbitcreek]

Installed on my 2015 SG last Fri, rained most of the week but got a few rides in and couldn't be happier. Used the Hi Output slipons w/ Power Duals, Std baffle map (suggested by CFR) and it runs great. Maybe just a little stutter off the line but really moves after that. I may try the Twin Slash Rounds w/ Power Duals map (suggested by V&H) I haven't run the auto tune yet, I'll ride this for a few weeks then maybe try auto tune. The CFRs really sound good.

 

[Mojo]

rabbitcreek- first off Welcome to SGF! You put together a great combination of mods for your new bike!!

 

[Rodz15SG]

My CFR's are on the way and I was just comparing the Dresser Duals vs the Power Duals. Is there much difference? For now, I'll role with the stock headers till I can get some feedback. Pretty stoked to get my CFR's, I've heard them with the S&S headers and they sounded crazy!

 

[Bluebowtie]

I think the power duals might help with the loss of back pressure. If I had to do it again I'd try a X pipe


Sent from the mobile leash

 

[Rodz15SG]

I have the same set up, and mine tends to do the sputtering, even maybe a skip feeling at 2500rpm. I asked V&H and they said to try the Twin-Slash Rounds with Power Duals map.

Have you had the same issue still Rabbit, or how's going?

 

[rabbitcreek]

I have been satisfied with the map I started with and haven't auto tuned. I don't notice any stutter now. The only thing is when first cranked up it idles at about 1500 rpm for 30/40 sec. the drops to 1000/1100

 

[TomA]

Have been very happy with my power duals and slash rounds. Auto tune really woke it up more.